$0.00
No products in the cart.
$0.00
No products in the cart.


US STOCK

US Flag
P51D – Throttle Starter Kit (U.S)

If this is your first AuthentiKit product and you want to start with the P-51D throttle then this is the kit for you. It contains all the electronics and hardware you need to build the throttle and universal hub and then connect it to your PC. It also includes the throttle mounting system that you can either attach to a fixing place of your own design or to the standard monitor stand rig which you can source locally – see authentikit.org/rig. All you need to do is 3D print the body parts and assemble.

NB* The photo of hardware contents is indicative only of the contents in the kit. Click below for the full contents list.

Click for full description

This kit contains everything you need to get off the ground with your AuthentiKit project. Containing all the hardware needed to build the AuthentiKit designed P51D Mustang throttle control, as well as the required hardware and BU0836A Joystick Controller Board to build the Universal Hub, which links the controls to your PC. Lastly this Kit also contains the Rig Ext A, containing the required 50cm Aluminium tubing for mounting your control to.

Containing

  • BU0836A 12-bit Joystick controller board.
  • 4 x 6803ZZ bearings
  • 4 x Honeywell SS494B Hall Sensors
  • 4 x Neodymium magnets
  • 30 x Ferrules
  • 4 x Adhesive backed nitrile bonded cork discs
  • 10 x RJ45 jacks
  • 1 x flat Omron tact switch
  • 3 x 24 Pulse rotary encoders
  • Black silicone tubing
  • 1 x rotary damper
  • 1 x compression spring
  • 26 AWG silicone insulated wire in 6 colours, lengths as required
  • Adhesive backed felt tape 25cm
  • 8 x Ethernet cables
  • 1 x USB Cable 1.5m
  • 60 x Dupont Cables
  • Wire Stripper
  • Orientation magnet
  • PH1/PH2 screwbits
  • Required screws and bolts
  • 4mm and 5mm allen keys
  • 50cm Aluminium tubing 27mm

*This kit does not contain 3D parts*

$175.00

7 in stock

3D Printed Parts

The above kit is for hardware only. If you would like someone in the AuthentiKit Community Approved Printing scheme to supply you with 3D printed parts please enter your contact details in the form below and we will introduce you. There are print partners in the USA, UK, Europe and Australasia. They will confirm P&P charges and answer any of your questions. You pay them directly with no commision to us..

The Recommended Selling Price for this 3D parts kit is

Additional information

3D Printed Parts RSP

$112
SKUSKU-US04Category