2. MkIX Elevator Trim and Throttle Quadrant [Hardware only]

The legendary Spitfire MkIX can now be replicated perfectly for use with your flight sim. Add this Elevator Trim and Throttle Quadrant on with ease to your home cockpit set up, and check out the rest of the AuthentiKit range to build your own easy to assemble home cockpit set up from scratch.

Which kits do I need?

  • If this is your 1st TIME Using AuthentiKit, then you need all 3 of the available kits here to build this product
  • If you already have an AuthentiKit product, then you don’t need the “Universal Hub *entry*” Kit
  • if you have built 3 AuthentiKit products already, you might need the “Universal Hub *add on*” kit
  • Don’t buy the Rig Extension if you already have it.


Click for full description

As well as 3D printed parts, the AuthentiKit home build projects require a large and varied number of different components, which can be time consuming and not very cost affective to source. Our kits takes away all the hassle. They contains everything you need (except the 3d printed parts) to build the AuthentiKit Spitfire MkIX Elevator Trim and Throttle Quadrant. In addition they contain spares and useful tools that take away much of the hassle you get when you don’t have quite the right screwdriver or allen key.

Together these kits will provide you with all the hardware you need to build the AuthentiKit spitfire MkIXElevator Trim and Throttle Quadrant.  They also contain the rig extension to add on to the monitor stand used for the spade grip Flight-stick

Together, these kits contains:

  • High quality sealed Bearings (6003, 6803)
  • Neodymium cube magnets
  • Specific electronic items - momentary push switch, mechanical rotary encoder, RJ45 jack
  • Multiple cables - AWG 26 Silicon wire, F-F dupont cables, ethernet cables
  • A1324LUA-T Hall effect sensor
  • Bespoke items - glossed silicon tubing, nitrile cork disks, 1mm felt tape, neoprene, all ready for use
  • Black powder-coated aluminium pole cut to the precise length needed
  • BUO836A 12-bit joystick board




10 in stock


3D Printed Parts

The above kit is for hardware only. If you would like someone in the AuthentiKit Community Approved Printing scheme to supply you with 3D printed parts please enter your contact details in the form below and we will introduce you. There are print partners in the USA, UK, Europe and Australasia. They will confirm P&P charges and answer any of your questions. You pay them directly with no commision to us..

The Recommended Selling Price for this 3D parts kit is