$0.00
No products in the cart.
$0.00
No products in the cart.


US STOCK

US Flag
Construction Kit 1 (U.S)

This bumper kit contains all the hardware parts you need to build any AuthentiKit control – except the screws which come in Construction Kit #2 (click to visit). So if you want the P-51D pedestal (it even includes the pedestal stickers) or the Spitfire chassis lever (again it includes the stickers) or the incredible twin engined Mosquito throttle then this is for you. In fact there is so much in here you can build several controls from just one kit. You can see the full contents via the link below.

If you are new to AuthentiKit you will also need the Universal Hub & Mounting System (click to visit)

Click for full description

This kit contains the hardware needed to build a variety of AuthentiKit designed controls, such as the P-51D pedestal, P-51D throttle or any of the Spitfire controls. The kit also includes the sticker sets specifically designed to give the P51 Pedestal and the Spitfire Chassis Lever controls authentic detail. Please check the information on the product page to make sure you are buying everything you need.

Containing:

  • 5 x 6803 Bearings
  • 5 x 6003 Bearings
  • 2 x 6700 Bearings
  • 4 x MR52 Bearings
  • 2 x 684 Bearing
  • 5 x Hall Sensors
  • 3 x Rotary Encoders
  • 5 x Neodymium Cube Magnets
  • 3 x Tact Switch Flat
  • 2 x Tact Switch Posted
  • 4 x Microswitch
  • 6 x RJ45 Sockets
  • 2 x Rotary Damper
  • 5 x Cork Disc 30mm
  • 3 x cork Disc 30mm Holed
  • 2 x Cork Disc 18mm
  • 2 x Ball Spring Plunger
  • 4 x Dowel Pins
  • 3 x Clinch Post
  • 3 x Fire Spring
  • 1 x Lever Spring
  • 1 x Pitch Spring
  • 1 x Roll Spring
  • 1 x Grip Wrap
  • 1m Bungee Chord
  • 40cm SIlicone tubing
  • 20cm Copper Wire
  • 100 x Ferrules
  • 5 x Zip Ties
  • 2 x 5mm Neoprene

NOT CONTAINING:

  • Screws - See Construction Kit #2
  • Rig Mounts - See Universal Hub & Mounting System
  • Universal Hub - See Universal Hub & Mounting System

*This kit does not contain 3D parts*

$149.00

7 in stock

3D Printed Parts

The above kit is for hardware only. If you would like someone in the AuthentiKit Community Approved Printing scheme to supply you with 3D printed parts please enter your contact details in the form below and we will introduce you. There are print partners in the USA, UK, Europe and Australasia. They will confirm P&P charges and answer any of your questions. You pay them directly with no commision to us..

The Recommended Selling Price for this 3D parts kit is

SKUSKU-US01Category