UK STOCK

Spitfire MkIX Trim Wheels Hardware Kit

If you’re an existing AuthentiKit user with your own 3D printer and would like to build this superb replica Spitfire MkIX Elevator Trim wheel and Rudder Bias wheel control then this hardware kit is for you. Validated against the Spitfires of the Royal Air Force these are sturdy replica controls and you can synchronise them to achieve 1:1 rotational movement as per a real Spitfire MkIX.

This Hardware Kit includes all the hardware you need to make the control but does not include parts for the essential AuthentiKit Universal Hub which connects the control to your PC. If you also need the hardware for a Universal Hub then choose the Starter Kit. If you don’t have a 3D printer and also need the 3D printed parts please order the All Inclusive Kit instead.

Click for full description

This kit contains the hardware needed to build the AuthentiKit Spitfire MkIX Elevator and Rudder Trim Wheel controls. It requires an AuthentiKit Universal Hub to connect it to your PC.

Containing:

  • 2 x Rotary Encoders
  • 2 x 30mm Nitrile bonded cork discs
  • 2 x 60032RS Bearings
  • 2 x RJ45 jacks
  • Silicone wire (5 colours)
  • 30 x Ferrules
  • White Silicone Sealant
  • Screws/bolts

£24.00

15 in stock